|
|
|
|
|
|
| |
| Home > Glass Laboratory Spray Dryer |
|
| Glass Laboratory Spray Dryers |
 |
A compact laboratory spray dryer with a maximum temperature of 200 maximum liquid flow rate/ evaporation capacity of 2000 ml per hour. |
|
The unit is ideal for product research and development and sample preparation in many industries. |
|
The unit incorporates all parts necessary for the spray drying process and allows control of inlet temperature, liquid sample flow, drying air flow and compressor pressure. The internal compressor activates the cleaning needle and the frequency of cleaning can be controlled. |
|
The M1 spray dryer is manufactured using the highest quality materials including 316 stainless steel, PTFE and borosilicate glass 3.3. A screw cap assembly allows for easy mounting of the atomizer directly on to the drying chamber. The atomizer and AL series nozzle is quickly dismantled for cleaning. |
|
 |
|
| Specification : |
|
|
| Air Flow Max. |
: |
90 cu. m./hr (Free running) |
| Compressor Pressure |
: |
8 bar (max) |
| Dimensions H X W X D |
: |
1040 X 330 X 500 mm |
| Evaporation Capacity |
: |
1040 X 330 X 500 mm |
| Heating Power |
: |
3000 w |
| Maximum Intel Temperature |
: |
200.C |
| Nozzle Diameter |
: |
0.5 mm with clean out needle assembly |
| Intel Temperature Controller |
: |
CAL 3300 PDI auto - tuning with Bright LED displays (10 mm digits ) |
| Voltage |
: |
230 V 50 Hz |
| Weight |
: |
52 kg |
|
|
| Top |
| Applications : |
|
|
The most successful drying applications for spray dryers are for solutions, slurries and pastes which :
- Cannot be dewatered mechanically
- Are heat sensitive and cannot be exposed to high temperatures for long periods or
- Contain ultrafine particles that will agglomerate and fuse if dried in any state other than a dilution.
|
|
Spray drying is especially applicable to heat sensitive products due to the exceptionally short residence time in the dryer hot zone. |
|
Pharmaceuticals, foodstuffs, pigments and dyes, detergents, urea and plasma are all products that have been successfully spray dried. |
|
|
| Process Monitoring & Configuration Software : |
|
|
CALgrafix is cost-effective process monitoring and controller configuration software that provides added value to using CAL's range of temperature and process controllers. Configuration are integrated within a simple WindowsTM based user interface. |
|
Features such as logging, charting, alarm indication, networking and CALgrafix is ideal in applications where there is a requirement to monitor and record temperature or other process data without the expense of developing a SCADA based system. |
|
|
| Top |
|
|
