|
|
|
|
|
|
| |
Home > Industrial Spray Dryer |
|
| Industrial Spray Dryer |
Download PDF |
 |
|
ISD-06 |
|
ISD-08 |
|
ISD-10 |
|
 |
|
 |
|
 |
|
Capacity : 25 kg /
hr w.e. |
|
Capacity : 50 kg /
hr w.e. |
|
Capacity : 100 kg /
hr w.e. |
|
|
| Compare Products : |
|
| Features |
ISD - 06 |
ISD - 08 |
ISD - 10 |
| Evaporation Capacity (inkg/hr)H2O |
25-50 |
50-100 |
100 and > as per customer requirements |
| M.O.C |
Product Contact Parts SS 316 |
| Supporting Structure |
MS |
MS |
MS |
| Air Flow (Max) |
1,200 cu.m./hr |
1,600 cu.m./hr |
2,000 cu.m./hr |
| Heater Type |
Indirect Oil Fired or Direct Gas Fired |
| Inlet Temp. |
Typical 200°C, Maximum 300°C |
| Heating Power (Max) |
75,000 kcal/hr |
1,25,000 kcal/hr |
2,00,000 kcal/hr |
| Atomization |
Pressure Nozzle or Two Fluid Nozzle |
Pressure Nozzle or Two Fluid Nozzle |
Pressure Nozzle or Two Fluid Nozzle |
| Pressure Nozzle Diameter |
1.6mm |
2mm |
2.4mm |
| Accessories |
Electromagnetic Hammers |
| Dimensions (LxWxH) |
8m x 8m x 7mm |
10m x 8m x 10m |
10m x 8m x 12m |
|
|
| Description : |
Top |
|
M.O.C.
- Product contact partsS.S 316.
- Support Structure M.S.
|
| Operations - Co Current & Counter Current. |
| Powder Collection - Spray Dried powder can be collected under cyclone as Single Point Discharge or optionally under chamber and cyclone as Two Point Discharge system. This gives flexibility to check particle size under chamber and cyclone |
| Atomization - Two types of nozzle system are provided i.e. Pressure Nozzle and Two Fluid Nozzle |
|
Features - Both exhaust and supply blowers are provided so the drying chamber is maintained under a slight vacuum hence minimizing powder loss.
- A cleaning door is provided on the main chamber for ease of cleaning.
|
| Applications - Spray drying can be used in a wide range of applications where the production of a free flowing powder sample is required. This technique has successfully processed materials in the following areas: |
| Beverages, Flavours and Colourings, Milk and Egg Products, Plant and Vegetable Extracts, Pharmaceuticals, Heat Sensitive Materials, Plastics, Polymers and Resins, Perfumes, Ceramics and Advanced Materials, Soaps and Detergents, Blood, Dyestuffs, Foodstuffs, Adhesives, Oxides, Textiles, Bones, Teeth and Tooth Amalgam and many others |
|
|
|
| Top |
|
|
|
|
